Handrails adjustable 150/50
SKU: cos102010va07 | Lieferzeit: 2-4 Weeks
handrails adjustable in height and width at both sides for the h/p/cosmos treadmill 150/50 (mercury from 04/2019).
The UserTerminal is eccentrically mounted at the crosstube (80 x 80 x 720mm) of the vertical front handrail tubes. The width adjustment is made by turning of two swivel arms with a covering of +/- 80 degrees from the center position. The swivel arms are fixed to the locking bar with serrated discs. The height adjustment is done in steps of 25 mm by pulling the locking bar up or down in the guiding tube while the locking bolt is pulled.
technical data (+/- 5mm):
height above the running surface (measured to upper edge of handrails):
max. adjustment top: 1200 mm
min. adjustment bottom: 750 mm
width between bars (tube center to tube center):
max. adjustment inside: 430 mm
max. adjustment outside: 1105 mm
handrail tube length: 1450 mm
tube diameter: 40 mm
weight: 69 kg
color: RAL 9010 pure white
This article is an option as outfit and alternative to the standard equipment. The price is therefore calculated as exchange standard items. For spare parts or for later retrofitting applies a different item number and it is a different price.
Adjustment of the handrails while in use by the subject is not permitted. Before height adjustment loosen the top levers by two turns. For adjusting the height, turn the locking knob to unlock the safety thread. Then hold the swivel arm with one hand and pull out the locking knob. Now pull the swivel arm up or down until the desired position is reached. Finally, release the locking knob und tighten the safety thread by turning the locking knob clockwise. Now tighten the top lever again.
Children are not permitted on the treadmill without permanent supervision and an installed fall arrest system.