Special treadmill running belt and more powerful drive system:
Running-Belt made of special thick material for use with "Spike-Shoes" and also for use of ski poles with steel peaks. The belt can also be used for normal running, cycles and wheelchairs.
Special treadmill running belt and more powerful drive system:
Running-Belt made of special thick material for use with "Spike-Shoes" and also for use of ski poles with steel peaks. The belt can also be used for normal running, cycles and wheelchairs.
for h/p/cosmos running machines with deck size 170-190/65.
The original rubber elements for shock absorption on the running deck are replaced by steel elements. This is to make the deck much harder and the subjects has lower energy consumption. But the load and shock on the subject also is increased and may cause health problems and injuries similar to running on hard asphalt on the street. The only remaining shock absorption is the running shoe, the running belt surface and the running machine frame with elevation element.
Special re-inforced running belt for use with metal tipped ski sticks and/or spiked shoes
Milled centre mark in the middle of the running belt for measurement / calibration in gait and motion analysis.
Width: approx. 6 mm
also applicable for running, cycling and wheelchair (wheelchair stabilizer extra accessory!)
Milled centre mark in the middle of the running belt for measurement / calibration in gait and motion analysis.
Width: approx. 6 mm
routed middle marking approx. 5 mm / for models with running surface 150/50 cm
Milled centre mark in the middle of the running belt for measurement / calibration in gait and motion analysis.
Width: approx. 6 mm
special heavy duty running belt with a belt thickness of 5mm for remarkably smooth running comfort