handrails upgrade (during production)

Special handrail with cross-bar for biycyle application. The adaption of the handrail is possible by h/p/cosmos treadmills ve/sat. The handrail include no pillar at the rear side to avoid any damages in the case of falling. Is is indispensable required to use a mechanical fall prevention.

 

length: 1832 mm

width: 60 mm

high: 903 mm

color: RAL9010 pure white

Special handrail with cross-bar for biycyle application. The adaption of the handrail is possible by h/p/cosmos treadmills ve/sat. The handrail include no pillar at the rear side to avoid any damages in the case of falling. Is is indispensable required to use a mechanical fall prevention.

 

length: 1832 mm

width: 60 mm

high: 903 mm

color: RAL9010 pure white

handrails adjustable in height and width at both sides for the h/p/cosmos treadmill 150/50 (mercury from 04/2019).

The UserTerminal is eccentrically mounted at the crosstube (80 x 80 x 720mm) of the vertical front handrail tubes. The width adjustment is made by turning of two swivel arms with a covering of +/- 80 degrees from the center position. The swivel arms are fixed to the locking bar with serrated discs. The height adjustment is done in steps of 25 mm by pulling the locking bar up or down in the guiding tube while the locking bolt is pulled. 

For motion analysis and speed training. Option consists of 2 short handrails. Only one screw to change handrails.

length: no gripable length

diameter: 60 mm

Due to the short length of the handrail either a horizontal bar or a fall prevention has to be used. Handrail tested and released acc. to EN 957-6. Not tested and released acc. to ASTM requirements (USA)