robowalk® expander system

1 pair of expander manual pulling units 125 cm (incl. 1 noose and 1 thigh cuff)

for the rear area - for all h/p/cosmos treadmills with running surface 150/50 cm.

The h/p/cosmos robomove® expander is an elastic cable system for wall mount
and therewith compatible to all kind of treadmill models.

Examples of use include:

Motion support, mobilization, locomotion, gait training and gait correction
for orthopaedic or neurological problems, coordination and functional training,
strength and endurance training.

Included:
2 nooses for hand or leg
8 srews and dowels for wallmount

The mounting bracket kit is used to hold the
cos30022 h / p / cosmos robowalk expander F System. It is flanged onto the bottom pillars of the treadmill frame stabilized by brackets.

Components:
2x mounting brackets that are mounted in place of the safety arch.
2x spacers between the handrail and mounting brackets (depending on version)
4x end capsACHTUNG: Wenn diese Option genutzt wird ist darauf zu achten, dass kein Sicherheitsbügel zusätzlich am Gerät montiert werden kann! Dieses Montagebügel-Set wird

accessories robowalk - size L (490-750 mm)

The h/p/cosmos robowalk is a rubber cable pull system for h/p/cosmos treadmills.

The patient's legs are attached to the rubber cable pulls via cuffs. These give motion support or resistance during gait motion. Especially the motion support that is given by the rubber cable pulls / expanders is a valuable help for patient and therapist to carry out the exercises longer and more physiologic and thereby to get better training results.

The h/p/cosmos robowalk is a rubber cable pull system for h/p/cosmos treadmills. The patient's legs are attached to the rubber cable pulls via cuffs. These give motion support or resistance during gait motion. Especially the motion support that is given by the rubber cable pulls / expanders is a valuable help for patient and therapist to carry out the exercises longer and more physiologic and thereby to get better training results.

for the rear area - for all h/p/cosmos treadmills with running surface 170&190/65 cm

1 piece expander pulling unit for vertical or horizontal wall mounting, length: 120 cm (incl. 1 noose and 1 thigh cuff M)

1 pair consisting of 2x Thigh cuff size MEDIUM
For fixation of the elastic cables of the h/p/cosmos robowalk expander to the patients thigh.
3mm cushioning, one side sticking coated. For thigh circumference 360 - 510mm (14,2" - 20,1")
With attached velcro point, surrounding polyester belt, two attached fixpoints (triangle), 1 buckle, attached h/p/cosmos sticker, size label, text label and left/right marking.